// Vorbis decoder written in Rust
//
// Copyright (c) 2016 est31 <MTest31@outlook.com>
// and contributors. All rights reserved.
// Licensed under MIT license, or Apache 2 license,
// at your option. Please see the LICENSE file
// attached to this source distribution for details.

/*!
Vorbis bitpacking layer

Functionality to read content from the bitpacking layer.

Implements vorbis spec, section 2.

The most important struct of this mod is the `BitpackCursor` struct.
It can be instantiated using `BitpackCursor::new()`.

Note that this implementation doesn't fully align with the spec in the regard that it assumes a byte is an octet.
This is no problem on most architectures.
This non-alignment to the spec is due to the fact that the rust language is highly leaned towards byte == u8,
and doesn't even have a builtin single byte type.
*/

use ::huffman_tree::{VorbisHuffmanTree, PeekedDataLookupResult};

/// A Cursor on slices to read numbers and bitflags, bit aligned.
pub struct BitpackCursor <'a> {
	bit_cursor :u8,
	byte_cursor :usize,
	inner :&'a[u8],
}

macro_rules! sign_extend {
( $num:expr, $desttype:ident, $bit_cnt_large:expr, $bit_cnt_small:expr) => { {
	let n = $num;
	let res :$desttype = n as $desttype;
	let k :u8 = $bit_cnt_large - $bit_cnt_small;
	res << k >> k
} }
}

#[test]
fn test_sign_extend() {
	assert_eq!(sign_extend!(0b00,  i8,  8,  2),  0);
	assert_eq!(sign_extend!(0b01,  i8,  8,  2),  1);
	assert_eq!(sign_extend!(0b11,  i8,  8,  2), -1);
	assert_eq!(sign_extend!(0b111, i8,  8,  3), -1);
	assert_eq!(sign_extend!(0b101, i8,  8,  3), -3);
	assert_eq!(sign_extend!(0b01111110, i16, 16, 8),  126);
	assert_eq!(sign_extend!(0b10000010, i16, 16, 8), -126);
}

/// Returns `num` bits of 1 (but never more than 8).
fn mask_bits(num : u8) -> u8 {
	!((!0u8).wrapping_shl(num as u32)) | if num >= 8 { 0xff } else { 0 }
}

// Same as mask_bits but different in a special case: for num % 8 == 0
// Make sure that 0 <= num <= 8.
fn bmask_bits(num : u8) -> u8 {
	(!0u8).wrapping_shr(8 - num as u32)
}

#[test]
fn test_mask_bits() {
	assert_eq!(mask_bits(0), 0b00000000);
	assert_eq!(mask_bits(1), 0b00000001);
	assert_eq!(mask_bits(2), 0b00000011);
	assert_eq!(mask_bits(3), 0b00000111);
	assert_eq!(mask_bits(4), 0b00001111);
	assert_eq!(mask_bits(5), 0b00011111);
	assert_eq!(mask_bits(6), 0b00111111);
	assert_eq!(mask_bits(7), 0b01111111);
	assert_eq!(mask_bits(8), 0b11111111);
}

#[test]
fn test_bmask_bits() {
	assert_eq!(bmask_bits(0), 0b11111111);
	assert_eq!(bmask_bits(1), 0b00000001);
	assert_eq!(bmask_bits(2), 0b00000011);
	assert_eq!(bmask_bits(3), 0b00000111);
	assert_eq!(bmask_bits(4), 0b00001111);
	assert_eq!(bmask_bits(5), 0b00011111);
	assert_eq!(bmask_bits(6), 0b00111111);
	assert_eq!(bmask_bits(7), 0b01111111);
	assert_eq!(bmask_bits(8), 0b11111111);
}

// The main macro to read bit aligned
// Note that `$octetnum` is the number of octets in $bitnum ($bitnum / 8 rounded down)
macro_rules! bpc_read_body {
( $rettype:ident, $bitnum:expr, $octetnum:expr, $selfarg:expr ) => { {
	let last_octet_partial :usize = ($bitnum as i8 - $octetnum as i8 * 8 > 0) as usize;
	let octetnum_rounded_up :usize = last_octet_partial + $octetnum;
	let bit_cursor_after = ($selfarg.bit_cursor + $bitnum) % 8;

	if ($selfarg.bit_cursor + $bitnum) as usize > 8 * octetnum_rounded_up {
		/*println!("Reading {} bits (octetnum={}, last_partial={}, total_touched={}+1)",
			$bitnum, $octetnum, last_octet_partial, $octetnum + last_octet_partial);
		println!("    byte_c={}; bit_c={}", $selfarg.byte_cursor, $selfarg.bit_cursor);// */
		/*print!("Reading {} bits (byte_c={}; bit_c={}) [] = {:?}", $bitnum,
			$selfarg.byte_cursor, $selfarg.bit_cursor,
			&$selfarg.inner[$selfarg.byte_cursor .. $selfarg.byte_cursor +
			1 + octetnum_rounded_up]);// */
		if $selfarg.byte_cursor + 1 + octetnum_rounded_up > $selfarg.inner.len() {
			//println!(" => Out of bounds :\\");
			return Err(());
		}
		let buf = &$selfarg.inner[$selfarg.byte_cursor
			.. $selfarg.byte_cursor + 1 + octetnum_rounded_up];
		let mut res :$rettype = buf[0] as $rettype;
		res >>= $selfarg.bit_cursor;
		let mut cur_bit_cursor = 8 - $selfarg.bit_cursor;
		for i in 1 .. octetnum_rounded_up {
			res |= (buf[i] as $rettype) << cur_bit_cursor;
			cur_bit_cursor += 8;
		}
		let last_bits = buf[octetnum_rounded_up] & mask_bits(bit_cursor_after);
		res |= (last_bits as $rettype) << cur_bit_cursor;
		$selfarg.byte_cursor += octetnum_rounded_up;
		$selfarg.bit_cursor = bit_cursor_after;
		//println!(" => {:?}", res);
		Ok(res)
	} else {
		/*println!("Reading {} bits (octetnum={}, last_partial={}, total_touched={})",
			$bitnum, $octetnum, last_octet_partial, $octetnum + last_octet_partial);
		println!("    byte_c={}; bit_c={}", $selfarg.byte_cursor, $selfarg.bit_cursor);// */
		/*print!("Reading {} bits (byte_c={}; bit_c={}) [] = {:?}", $bitnum,
			$selfarg.byte_cursor, $selfarg.bit_cursor,
			&$selfarg.inner[$selfarg.byte_cursor .. $selfarg.byte_cursor +
			octetnum_rounded_up]);// */
		if $selfarg.byte_cursor + octetnum_rounded_up > $selfarg.inner.len() {
			//println!(" => Out of bounds :\\");
			return Err(());
		}
		let buf = &$selfarg.inner[$selfarg.byte_cursor ..
			$selfarg.byte_cursor + octetnum_rounded_up];
		let mut res :$rettype = buf[0] as $rettype;
		res >>= $selfarg.bit_cursor;
		if $bitnum <= 8 {
			res &= mask_bits($bitnum) as $rettype;
		}
		let mut cur_bit_cursor = 8 - $selfarg.bit_cursor;
		for i in 1 .. octetnum_rounded_up - 1 {
			res |= (buf[i] as $rettype) << cur_bit_cursor;
			cur_bit_cursor += 8;
		}
		if $bitnum > 8 {
			let last_bits = buf[octetnum_rounded_up - 1] & bmask_bits(bit_cursor_after);
			res |= (last_bits as $rettype) << cur_bit_cursor;
		}
		$selfarg.byte_cursor += $octetnum;
		$selfarg.byte_cursor += ($selfarg.bit_cursor == 8 - ($bitnum % 8)) as usize;
		$selfarg.bit_cursor = bit_cursor_after;
		//println!(" => {:?}", res);
		Ok(res)
	}
} }
}

// The main macro to peek bit aligned
// Note that `$octetnum` is the number of octets in $bitnum ($bitnum / 8 rounded down)
macro_rules! bpc_peek_body {
( $rettype:ident, $bitnum:expr, $octetnum:expr, $selfarg:expr ) => { {
	let last_octet_partial :usize = ($bitnum as i8 - $octetnum as i8 * 8 > 0) as usize;
	let octetnum_rounded_up :usize = last_octet_partial + $octetnum;
	let bit_cursor_after = ($selfarg.bit_cursor + $bitnum) % 8;

	if ($selfarg.bit_cursor + $bitnum) as usize > 8 * octetnum_rounded_up {
		/*println!("Reading {} bits (octetnum={}, last_partial={}, total_touched={}+1)",
			$bitnum, $octetnum, last_octet_partial, $octetnum + last_octet_partial);
		println!("    byte_c={}; bit_c={}", $selfarg.byte_cursor, $selfarg.bit_cursor);// */
		/*print!("Reading {} bits (byte_c={}; bit_c={}) [] = {:?}", $bitnum,
			$selfarg.byte_cursor, $selfarg.bit_cursor,
			&$selfarg.inner[$selfarg.byte_cursor .. $selfarg.byte_cursor +
			1 + octetnum_rounded_up]);// */
		if $selfarg.byte_cursor + 1 + octetnum_rounded_up > $selfarg.inner.len() {
			//println!(" => Out of bounds :\\");
			return Err(());
		}
		let buf = &$selfarg.inner[$selfarg.byte_cursor
			.. $selfarg.byte_cursor + 1 + octetnum_rounded_up];
		let mut res :$rettype = buf[0] as $rettype;
		res >>= $selfarg.bit_cursor;
		let mut cur_bit_cursor = 8 - $selfarg.bit_cursor;
		for i in 1 .. octetnum_rounded_up {
			res |= (buf[i] as $rettype) << cur_bit_cursor;
			cur_bit_cursor += 8;
		}
		let last_bits = buf[octetnum_rounded_up] & mask_bits(bit_cursor_after);
		res |= (last_bits as $rettype) << cur_bit_cursor;
		//println!(" => {:?}", res);
		Ok(res)
	} else {
		/*println!("Reading {} bits (octetnum={}, last_partial={}, total_touched={})",
			$bitnum, $octetnum, last_octet_partial, $octetnum + last_octet_partial);
		println!("    byte_c={}; bit_c={}", $selfarg.byte_cursor, $selfarg.bit_cursor);// */
		/*print!("Reading {} bits (byte_c={}; bit_c={}) [] = {:?}", $bitnum,
			$selfarg.byte_cursor, $selfarg.bit_cursor,
			&$selfarg.inner[$selfarg.byte_cursor .. $selfarg.byte_cursor +
			octetnum_rounded_up]);// */
		if $selfarg.byte_cursor + octetnum_rounded_up > $selfarg.inner.len() {
			//println!(" => Out of bounds :\\");
			return Err(());
		}
		let buf = &$selfarg.inner[$selfarg.byte_cursor ..
			$selfarg.byte_cursor + octetnum_rounded_up];
		let mut res :$rettype = buf[0] as $rettype;
		res >>= $selfarg.bit_cursor;
		if $bitnum <= 8 {
			res &= mask_bits($bitnum) as $rettype;
		}
		let mut cur_bit_cursor = 8 - $selfarg.bit_cursor;
		for i in 1 .. octetnum_rounded_up - 1 {
			res |= (buf[i] as $rettype) << cur_bit_cursor;
			cur_bit_cursor += 8;
		}
		if $bitnum > 8 {
			let last_bits = buf[octetnum_rounded_up - 1] & bmask_bits(bit_cursor_after);
			res |= (last_bits as $rettype) << cur_bit_cursor;
		}
		//println!(" => {:?}", res);
		Ok(res)
	}
} }
}

// The main macro to advance bit aligned
// Note that `$octetnum` is the number of octets in $bitnum ($bitnum / 8 rounded down)
macro_rules! bpc_advance_body {
( $bitnum:expr, $octetnum:expr, $selfarg:expr ) => { {
	let last_octet_partial :usize = ($bitnum as i8 - $octetnum as i8 * 8 > 0) as usize;
	let octetnum_rounded_up :usize = last_octet_partial + $octetnum;
	let bit_cursor_after = ($selfarg.bit_cursor + $bitnum) % 8;

	if ($selfarg.bit_cursor + $bitnum) as usize > 8 * octetnum_rounded_up {
		$selfarg.byte_cursor += octetnum_rounded_up;
		$selfarg.bit_cursor = bit_cursor_after;
		//println!(" => {:?}", res);
		Ok(())
	} else {
		$selfarg.byte_cursor += $octetnum;
		$selfarg.byte_cursor += ($selfarg.bit_cursor == 8 - ($bitnum % 8)) as usize;
		$selfarg.bit_cursor = bit_cursor_after;
		//println!(" => {:?}", res);
		Ok(())
	}
} }
}

macro_rules! uk_reader {
( $fnname:ident, $rettype:ident, $bitnum:expr, $octetnum:expr) => {
	#[inline]
	pub fn $fnname(&mut self) -> Result<$rettype, ()> {
		bpc_read_body!($rettype, $bitnum, $octetnum, self)
	}
}
}

macro_rules! ik_reader {
( $fnname:ident, $rettype:ident, $bitnum_of_rettype:expr, $bitnum:expr, $octetnum:expr) => {
	#[inline]
	pub fn $fnname(&mut self) -> Result<$rettype, ()> {
		Ok(sign_extend!(try!(
			bpc_read_body!($rettype, $bitnum, $octetnum, self)),
			$rettype, $bitnum_of_rettype, $bitnum))
	}
}
}

macro_rules! ik_dynamic_reader {
( $fnname:ident, $rettype:ident, $bitnum_of_rettype:expr) => {
	#[inline]
	pub fn $fnname(&mut self, bit_num :u8) -> Result<$rettype, ()> {
		let octet_num :usize = (bit_num / 8) as usize;
		assert!(bit_num <= $bitnum_of_rettype);
		Ok(sign_extend!(try!(
			bpc_read_body!($rettype, bit_num, octet_num, self)),
			$rettype, $bitnum_of_rettype, bit_num))
	}
}
}

macro_rules! uk_dynamic_reader {
( $fnname:ident, $rettype:ident, $bit_num_max:expr) => {
	#[inline]
	pub fn $fnname(&mut self, bit_num :u8) -> Result<$rettype, ()> {
		let octet_num :usize = (bit_num / 8) as usize;
		if bit_num == 0 {
			// TODO: one day let bpc_read_body handle this,
			// if its smartly doable in there.
			// For why it is required, see comment in the
			// test_bitpacking_reader_empty function.
			return Ok(0);
		}
		assert!(bit_num <= $bit_num_max);
		bpc_read_body!($rettype, bit_num, octet_num, self)
	}
}
}

fn float32_unpack(val :u32) -> f32 {
	let sgn = val & 0x80000000;
	let exp = (val & 0x7fe00000) >> 21;
	let mantissa = (val & 0x1fffff) as f64;
	let signed_mantissa = if sgn != 0 {
		-mantissa
	} else {
		mantissa
	};
	return signed_mantissa as f32 * (exp as f32 - 788.0).exp2();
}

#[test]
fn test_float_32_unpack() {
	// Values were printed out from what stb_vorbis
	// calculated for this function from a test file.
	assert_eq!(float32_unpack(1611661312),      1.000000);
	assert_eq!(float32_unpack(1616117760),      5.000000);
	assert_eq!(float32_unpack(1618345984),     11.000000);
	assert_eq!(float32_unpack(1620115456),     17.000000);
	assert_eq!(float32_unpack(1627381760),    255.000000);
	assert_eq!(float32_unpack(3759144960),     -1.000000);
	assert_eq!(float32_unpack(3761242112),     -2.000000);
	assert_eq!(float32_unpack(3763339264),     -4.000000);
	assert_eq!(float32_unpack(3763601408),     -5.000000);
	assert_eq!(float32_unpack(3765436416),     -8.000000);
	assert_eq!(float32_unpack(3765829632),    -11.000000);
	assert_eq!(float32_unpack(3768451072),    -30.000000);
	assert_eq!(float32_unpack(3772628992),   -119.000000);
	assert_eq!(float32_unpack(3780634624),  -1530.000000);
}

#[test]
fn test_float_32_unpack_issue_24() {
	// Regression test for issue #24, a
	// mismatch in decoded output for audio_simple_with_error.ogg
	// and singlemap-test.ogg.
	// The values are taken from the codebook_delta_value and
	// codebook_minimum_value values of the singlemap-test.ogg file.
	// The expected values come from stb_vorbis.
	assert_eq!(float32_unpack(1628434432), 255.0);
	assert_eq!(float32_unpack(1621655552), 17.0);
	assert_eq!(float32_unpack(1619722240), 11.0);
	assert_eq!(float32_unpack(1613234176), 1.0);
	assert_eq!(float32_unpack(3760717824), -1.0);
	assert_eq!(float32_unpack(3762814976), -2.0);
	assert_eq!(float32_unpack(3764912128), -4.0);
	assert_eq!(float32_unpack(3765043200), -5.0);
	assert_eq!(float32_unpack(3767009280), -8.0);
	assert_eq!(float32_unpack(3767205888), -11.0);
	assert_eq!(float32_unpack(3769565184), -30.0);
	assert_eq!(float32_unpack(3773751296), -119.0);
	assert_eq!(float32_unpack(3781948416), -1530.0);
}

// allow some code that is only used in the tests
#[allow(dead_code)]
impl <'a> BitpackCursor <'a> {

	/// Creates a new `BitpackCursor` for the given data array
	pub fn new(arr : &'a[u8]) -> BitpackCursor {
		return BitpackCursor::<'a> { bit_cursor: 0, byte_cursor: 0, inner: arr };
	}

	// Unsigned, non-dynamic reader methods

	// u32 based

	// TODO add here if needed
	uk_reader!(read_u32, u32, 32, 4);
	// TODO add here if needed
	uk_reader!(read_u24, u32, 24, 3);
	// TODO add here if needed

	// u16 based

	uk_reader!(read_u16, u16, 16, 2);

	// TODO add here if needed
	uk_reader!(read_u13, u16, 13, 1);
	// TODO add here if needed

	// u8 based
	uk_reader!(read_u8, u8, 8, 1);
	uk_reader!(read_u7, u8, 7, 0);
	uk_reader!(read_u6, u8, 6, 0);
	uk_reader!(read_u5, u8, 5, 0);
	uk_reader!(read_u4, u8, 4, 0);
	uk_reader!(read_u3, u8, 3, 0);
	uk_reader!(read_u2, u8, 2, 0);
	uk_reader!(read_u1, u8, 1, 0);

	// Returning bool:
	#[inline]
	pub fn read_bit_flag(&mut self) -> Result<bool, ()> {
		return Ok(try!(self.read_u1()) == 1);
	}

	// Unsigned dynamic reader methods
	// They panic if you give them invalid params
	// (bit_num larger than maximum allowed bit number for the type)
	uk_dynamic_reader!(read_dyn_u8,  u8,  8);
	uk_dynamic_reader!(read_dyn_u16, u16, 16);
	uk_dynamic_reader!(read_dyn_u32, u32, 32);
	uk_dynamic_reader!(read_dyn_u64, u64, 64);

	// Signed non-dynamic reader methods

	ik_reader!(read_i32, i32, 32, 32, 4);
	// TODO add here if needed

	ik_reader!(read_i8, i8, 8, 8, 1);
	ik_reader!(read_i7, i8, 8, 7, 0);
	// TODO add here if needed

	// Signed dynamic reader methods
	// They panic if you give them invalid params
	// (bit_num larger than maximum allowed bit number for the type)
	ik_dynamic_reader!(read_dyn_i8,  i8,  8);
	ik_dynamic_reader!(read_dyn_i16, i16, 16);
	ik_dynamic_reader!(read_dyn_i32, i32, 32);

	// Float reading methods

	/// Reads a single floating point number in the vorbis-float32 format
	pub fn read_f32(&mut self) -> Result<f32, ()> {
		let val = try!(self.read_u32());
		Ok(float32_unpack(val))
	}

	/// Peeks 8 bits of non read yet content without advancing the reader
	#[inline]
	pub fn peek_u8(&self) -> Result<u8, ()> {
		bpc_peek_body!(u8, 8, 1, self)
	}

	// Advances the reader by the given number of bits (up to 8).
	pub fn advance_dyn_u8(&mut self, bit_num :u8) -> Result<(), ()> {
		let octet_num :usize = (bit_num / 8) as usize;
		if bit_num == 0 {
			// TODO: one day let bpc_advance_body handle this,
			// if its smartly doable in there.
			// For why it is required, see comment in the
			// test_bitpacking_reader_empty function.
			return Ok(());
		}
		assert!(bit_num <= 8);
		bpc_advance_body!(bit_num, octet_num, self)
	}

	/// Reads a huffman word using the codebook abstraction
	pub fn read_huffman(&mut self, tree :&VorbisHuffmanTree) -> Result<u32, ()> {
		//let mut c :usize = 0;
		//let mut w :usize = 0;
		let mut iter = match self.peek_u8() {
			Ok(data) => match tree.lookup_peeked_data(8, data as u32) {
				PeekedDataLookupResult::Iter(advance, iter) => {
					try!(self.advance_dyn_u8(advance));
					iter
				},
				PeekedDataLookupResult::PayloadFound(advance, payload) => {
					try!(self.advance_dyn_u8(advance));
					return Ok(payload);
				},
			},
			Err(_) => tree.iter(),
		};

		loop {
			let b = try!(self.read_bit_flag());
			/*
			c +=1;
			w >>= 1;
			w |= (b as usize) << 63;
			// Put this into the Some arm of the match below in order to debug:
			{print!("({}:{}:{}) ", w >> (64 - c), v, c); }
			// */
			match iter.next(b) {
				Some(v) => return Ok(v),
				None => (),
			}
		}
	}
}

#[test]
fn test_bitpacking_reader_static() {
	// Test vectors taken from Vorbis I spec, section 2.1.6
	let test_arr = &[0b11111100, 0b01001000, 0b11001110, 0b00000110];
	let mut cur = BitpackCursor::new(test_arr);
	assert_eq!(cur.read_u4().unwrap(),  12);
	assert_eq!(cur.read_u3().unwrap(),  7);
	assert_eq!(cur.read_u7().unwrap(),  17);
	assert_eq!(cur.read_u13().unwrap(), 6969);
}

#[test]
fn test_bitpacking_reader_dynamic() {
	// Test vectors taken from Vorbis I spec, section 2.1.6
	let test_arr = &[0b11111100, 0b01001000, 0b11001110, 0b00000110];
	let mut cur = BitpackCursor::new(test_arr);
	assert_eq!(cur.read_dyn_u8(4).unwrap(),   12);
	assert_eq!(cur.read_dyn_u8(3).unwrap(),   7);
	assert_eq!(cur.read_dyn_u16(7).unwrap(),  17);
	assert_eq!(cur.read_dyn_u16(13).unwrap(), 6969);

	// Regression test for bug
	let test_arr = &[93, 92];
	let mut cur = BitpackCursor::new(test_arr);
	assert_eq!(cur.read_dyn_u32(10).unwrap(), 93);
}

#[test]
fn test_bitpacking_reader_empty() {
	// Same as the normal bitpacking test
	// but with some additional empty reads.
	//
	// This is expected to happen by the vorbis spec.
	// For example, the mode_number read in the audio packet
	// decode at first position may be 0 bit long (if there
	// is only one mode, ilog([vorbis_mode_count] - 1) is zero).

	let test_arr = &[0b11111100, 0b01001000, 0b11001110, 0b00000110];
	let mut cur = BitpackCursor::new(test_arr);
	assert_eq!(cur.read_dyn_u8(4).unwrap(),   12);
	assert_eq!(cur.read_dyn_u8(0).unwrap(),   0);
	assert_eq!(cur.read_dyn_u8(0).unwrap(),   0);
	assert_eq!(cur.read_dyn_u8(3).unwrap(),   7);
	assert_eq!(cur.read_dyn_u8(0).unwrap(),   0);
	assert_eq!(cur.read_dyn_u16(7).unwrap(),  17);
	assert_eq!(cur.read_dyn_u16(0).unwrap(),   0);
	assert_eq!(cur.read_dyn_u16(0).unwrap(),   0);
	assert_eq!(cur.read_dyn_u16(13).unwrap(), 6969);
	assert_eq!(cur.read_dyn_u16(0).unwrap(),   0);
}

#[test]
fn test_bitpacking_reader_byte_aligned() {
	// Check that bitpacking readers work with "normal" byte aligned types:
	let test_arr = &[0x00, 0x00, 0x00, 0x00, 0x01];
	let mut cur = BitpackCursor::new(test_arr);
	assert_eq!(cur.read_dyn_u32(32).unwrap(), 0);
	assert_eq!(cur.read_dyn_u8(8).unwrap(),   1);

	// We not just check here whether it works for byte aligned
	// "normal" (non-dynamic) reader methods, we also check
	// whether, after reading first one, then seven bits,
	// it "gets back" to byte alignment (and increases the byte ctr)
	let test_arr = &[0x09, 0x02, 0x00, 0x00, 0x00, 0x00, 0x01];
	let mut cur = BitpackCursor::new(test_arr);
	assert_eq!(cur.read_u1().unwrap(), 1);
	assert_eq!(cur.read_u7().unwrap(), 4);
	assert_eq!(cur.read_i8().unwrap(), 2);
	assert_eq!(cur.read_u32().unwrap(), 0);
	assert_eq!(cur.read_u8().unwrap(), 1);
}

#[test]
fn test_capture_pattern_nonaligned() {
	// Regression test from test OGG file
	// Tests for proper codebook capture
	// pattern reading.
	//
	// The OGG vorbis capture pattern
	// is a three octet (24 bits) value.
	//
	// The first block tests capture pattern
	// reading in a byte aligned scenario.
	// The actually problematic part was
	// the second block: it tests capture
	// pattern reading in a non-aligned
	// situation.

	let capture_pattern_arr = &[0x42, 0x43, 0x56];
	let mut cur = BitpackCursor::new(capture_pattern_arr);
	assert_eq!(cur.read_u24().unwrap(), 0x564342);

	let test_arr = &[0x28, 0x81, 0xd0, 0x90, 0x55, 0x00, 0x00];
	let mut cur = BitpackCursor::new(test_arr);
	cur.read_u5().unwrap(); // some value we are not interested in
	cur.read_u5().unwrap(); // some value we are not interested in
	assert_eq!(cur.read_u4().unwrap(), 0);
	assert_eq!(cur.read_u24().unwrap(), 0x564342);
	// Ensure that we incremented by only three bytes, not four
	assert_eq!(cur.read_u16().unwrap(), 1);
}