347 lines
13 KiB
Markdown
347 lines
13 KiB
Markdown
# ALSA Scarlett Control Panel
|
||
|
||
## Scarlett Small 4th Gen Interfaces
|
||
|
||
This document describes how to use the ALSA Scarlett Control Panel
|
||
with the small Scarlett 4th Gen interfaces:
|
||
|
||
- Scarlett 4th Gen Solo, 2i2, and 4i4
|
||
|
||
### Comparison with earlier Scarlett and Clarett Interfaces
|
||
|
||
If you are familiar with the Scarlett 2nd and 3rd Gen interfaces or
|
||
the Clarett interfaces, the major differences to the 4th Gen
|
||
interfaces from the point of view of this software are:
|
||
|
||
- The 4th Gen Solo and 2i2 interfaces have the full routing and mixing
|
||
capabilities of the larger 2nd and 3rd Gen and Clarett interfaces
|
||
(although the line outputs and the headphone outputs are still
|
||
linked).
|
||
|
||
- The 4th Gen 2i2 and 4i4 interfaces have software-controllable
|
||
(“remote”) input gain controls.
|
||
|
||
- The 4th Gen interfaces don’t have the output volume and mute
|
||
controls that the 2nd and 3rd Gen and Clarett interfaces have.
|
||
|
||
- The Air mode with Presence+Drive is implemented with a DSP which is
|
||
separately routable.
|
||
|
||
## Main Window
|
||
|
||
The main window is divided into three sections:
|
||
- Global Controls
|
||
- Analogue Input Controls
|
||
- Analogue Output Controls
|
||
|
||
The main window for the Solo and 2i2 interfaces is shown below; the
|
||
4i4 interface is similar to the 2i2, but doesn’t have the Direct
|
||
Monitor control, and can show the position of the front panel volume
|
||
knobs.
|
||
|
||
|
||
|
||
### Global Controls
|
||
|
||
#### Sync Status
|
||
|
||
Sync Status indicates if the interface is locked to a valid digital
|
||
clock. This should only ever briefly show “Unlocked” when the sample
|
||
rate is changed as these interfaces can only use their internal clock.
|
||
|
||
#### Power
|
||
|
||
The 4i4 has a “Power” control that displays the power status. It can
|
||
be “Fail”, “Bus”, or “External”. “Fail” means that the interface is
|
||
not receiving sufficient power; please see the Scarlett 4i4 4th Gen
|
||
User Guide for more information. “Bus” vs. “External” indicates
|
||
whether the interface is receiving power from the second USB-C port
|
||
(“External”) or not (“Bus”).
|
||
|
||
#### Sample Rate
|
||
|
||
Sample Rate is informative only, and displays the current sample rate
|
||
if the interface is currently in use. In ALSA, the sample rate is set
|
||
by the application using the interface, which is usually a sound
|
||
server such as PulseAudio, JACK, or PipeWire.
|
||
|
||
### Analogue Input Controls
|
||
|
||
The analogue input controls available depend on the interface model:
|
||
|
||
- **Instrument, Air, and Phantom Power**: All models
|
||
- **Mix**: Solo only (described later in the [Solo Mix
|
||
Control](#solo-mix-control) section)
|
||
- **Input Select, Link, Gain, Autogain, and Safe**: 2i2 and 4i4
|
||
|
||
#### Instrument
|
||
|
||
The Inst button(s) are used to select between Mic/Line and Instrument
|
||
level/impedance. When plugging in microphones or line-level equipment
|
||
(such as a synthesizer, external preamp, or effects processor) to the
|
||
input, set it to “Line”. The “Inst” setting is for instruments with
|
||
pickups such as guitars.
|
||
|
||
#### Air
|
||
|
||
The Scarlett 3rd Gen introduced Air mode which transformed your
|
||
recordings and inspired you while making music by boosting the
|
||
signal’s high-end. The 4th Gen interfaces now call that “Air Presence”
|
||
and add a new mode “Air Presence+Drive” which boosts mid-range
|
||
harmonics in your sound.
|
||
|
||
#### Phantom Power (48V)
|
||
|
||
Turning the “48V” switch on sends “Phantom Power” to the XLR
|
||
microphone input. This is required for some microphones (such as
|
||
condensor microphones), and damaging to some microphones (particularly
|
||
vintage ribbon microphones).
|
||
|
||
The 2i2 has a single 48V switch that controls both channels, and the
|
||
4i4 has an independent 48V switch for each channel.
|
||
|
||
#### Input Select
|
||
|
||
The 2i2 and 4i4 interfaces have hardware buttons for 48V, Inst, Air,
|
||
Auto, and Safe. The “Input Select” control allows you to choose which
|
||
channel those buttons control.
|
||
|
||
#### Link
|
||
|
||
The “Link” control links the 48V, Inst, Air, Auto, and Safe controls
|
||
together so that they control both channels simultaneously.
|
||
|
||
#### Gain
|
||
|
||
The “Gain” controls adjust the input gain for the selected channel.
|
||
Click and drag up/down on the control to adjust the gain, use your
|
||
mouse scroll wheel, or click the control to select it and use the
|
||
arrow keys, Page Up, Page Down, Home, and End keys.
|
||
|
||
#### Autogain
|
||
|
||
When the “Autogain” control is enabled, the interface will listen to
|
||
the input signal for ten seconds and automatically adjust the gain to
|
||
get the best signal level. When autogain is not running, the
|
||
most-recent autogain exit status is shown below the “Autogain”
|
||
control.
|
||
|
||
#### Safe
|
||
|
||
“Safe” mode is a feature that automatically reduces the gain if the
|
||
signal is too loud. This can be useful to prevent clipping.
|
||
|
||
### Analogue Output Controls
|
||
|
||
The analogue output controls available depend on the interface model:
|
||
|
||
- **Direct Monitor**: Solo and 2i2
|
||
- **Volume Knobs**: 4i4
|
||
|
||
#### Direct Monitor
|
||
|
||
Enabling Direct Monitor sends the analogue input signals to the
|
||
analogue outputs (speakers/headphones) for zero-latency monitoring.
|
||
|
||
On the 2i2, you have the choice of Mono or Stereo monitoring when you
|
||
click the button:
|
||
|
||
- **Mono** sends both inputs to the left and right outputs
|
||
- **Stereo** sends input 1 to the left, and input 2 to the right
|
||
output.
|
||
|
||
As the 4th Gen Solo and 2i2 interfaces have the full routing and
|
||
mixing capabilities of the larger 2nd and 3rd Gen interfaces, the
|
||
Direct Monitor levels can be [adjusted in the
|
||
mixer](#solo-direct-monitor).
|
||
|
||
The 4i4 has no Direct Monitor button, but that functionality can be
|
||
achieved with [appropriate configuration in the routing and mixing
|
||
windows](#4i4-sample-direct-monitor-configuration).
|
||
|
||
#### Volume Knobs
|
||
|
||
The 4i4 interface has volume knobs on the front panel, the position of
|
||
which is shown in the main window.
|
||
|
||
## Routing and Mixing
|
||
|
||
The routing and mixing capabilities of the 4th Gen interfaces are the
|
||
same in concept as the 2nd and 3rd Gen interfaces, but there is a DSP
|
||
which is separately routable, and the default routing uses the mixer
|
||
extensively.
|
||
|
||
From the main window, open the Routing window with the View → Routing
|
||
menu option or pressing Ctrl-R:
|
||
|
||
|
||
|
||
To understand the signal flow, note the following:
|
||
1. The Analogue 1 & 2 Inputs (i.e. the Mic/Line/Inst inputs) are
|
||
routed to the DSP Inputs.
|
||
2. The DSP Outputs are routed to the PCM 1 & 2 Inputs (that’s what
|
||
ALSA sees as the first two inputs from the interface for
|
||
recording).
|
||
3. The PCM Outputs (that’s what ALSA sees as the interface outputs for
|
||
playback) and the DSP Outputs are all connected to the Mixer
|
||
Inputs.
|
||
4. The Mixer A & B Outputs are connected to the Hardware Analogue
|
||
outputs (i.e. your speakers/headphones) so you can hear any mix of
|
||
the PCM and DSP Outputs (this is how the Direct Monitor function
|
||
works).
|
||
5. The Mixer C & D Outputs are connected to the PCM 3 & 4 Inputs (this
|
||
is referred to as Loopback, for recording audio from your computer,
|
||
but can be used for another purpose if you want).
|
||
|
||
Important Notes:
|
||
- The “Presets” are generally not useful with the 4th Gen interfaces
|
||
as they are designed for the 2nd and 3rd Gen interfaces. If you try
|
||
these out, you’ll probably want to reset back to the factory
|
||
defaults afterwards.
|
||
- Besides Air Mode, the DSP is also used for the gain halo level
|
||
meters and autogain, so if you route something else to the DSP
|
||
Inputs, those features will work “rather differently”.
|
||
- The Focusrite Control 2 software can’t control most of this routing,
|
||
so if you make changes here and then want to use Focusrite Control
|
||
2, you’ll probably need to reset the routing back to the factory
|
||
default settings.
|
||
|
||
To adjust the routing:
|
||
|
||
- Click and drag from a source to a sink or a sink to a source to
|
||
connect them. Audio from the source will then be sent to that sink.
|
||
|
||
- Click on a source or a sink to clear the links connected to that
|
||
source/sink.
|
||
|
||
Note that a sink can only be connected to one source, but one source
|
||
can be connected to many sinks.
|
||
|
||
To adjust the mixer output levels:
|
||
|
||
1) Open the mixer window with the main window View → Mixer menu
|
||
option, or press Ctrl-M.
|
||
|
||
2) Mixer levels can be adjusted with your keyboard or mouse in the
|
||
same way as the [Gain Controls](#gain).
|
||
|
||
### Solo Direct Monitor
|
||
|
||
When you enable or disable Direct Monitor on the Solo interface, the
|
||
interface will update the Mix A and B Outputs so that the DSP 1 & 2
|
||
Outputs are mixed in (or not) with the PCM 1 & 2 Outputs. Note how the
|
||
volume of the PCM outputs is also reduced when Direct Monitor is
|
||
enabled so that you can hear the DSP outputs (i.e. your Analogue
|
||
inputs) more clearly.
|
||
|
||
|
||
|
||
If you customise the Mix A/B mixer levels while Direct Monitor is
|
||
enabled, the new settings will be saved and used when Direct Monitor
|
||
is enabled again.
|
||
|
||
### 2i2 Direct Monitor
|
||
|
||
Similarly to the Solo interface, the 2i2 interface will update the Mix
|
||
A and B Outputs when you enable or disable Direct Monitor, but the 2i2
|
||
has Mono and Stereo options:
|
||
|
||
|
||
|
||
Note how in Mono mode:
|
||
|
||
- the DSP 1 & 2 Outputs are mixed to both the left and right outputs
|
||
|
||
and in Stereo mode:
|
||
|
||
- DSP 1 (i.e. Analogue Input 1) is sent to the left output (Mix A),
|
||
and
|
||
- DSP 2 (i.e. Analogue Input 2) is sent to the right output (Mix B).
|
||
|
||
### Solo Mix Control
|
||
|
||
The Mix control is only available on the Solo interface. It switches
|
||
the source for the PCM 1 & 2 Inputs between the DSP Outputs and the
|
||
Mixer E & F Outputs.
|
||
|
||
|
||
|
||
By default, enabling this control will mix the Analogue 1 & 2 Inputs
|
||
together before they are sent to the PCM 1 & 2 Inputs:
|
||
|
||
|
||
|
||
This can be useful if you want to treat the PCM 1 & 2 Inputs as a
|
||
stereo pair, and not have the line/instrument input panned hard left
|
||
and the microphone input panned hard right.
|
||
|
||
The mixer levels for the Mix E & F Outputs can adjusted to suit.
|
||
|
||
### 4i4 Routing and Mixing
|
||
|
||
Although the 4th Gen 4i4 has no explicit Direct Monitor control, it is
|
||
far more flexible because it has 6 PCM inputs, 6 PCM outputs, a 10×6
|
||
mixer, and 6 Analogue Hardware outputs.
|
||
|
||
Analogue Outputs 1–4 correspond to the Line Outputs 1–4 on the back of
|
||
the interface, and Analogue Outputs 5–6 correspond to the Headphone
|
||
Output on the front of the interface.
|
||
|
||
The default routing and mix for the 4i4 is shown below:
|
||
|
||
|
||
|
||
Note that with the default routing/mix settings:
|
||
- The Analogue Inputs 1–4 are routed to the PCM Inputs 1–4 (the first
|
||
two going via the DSP).
|
||
- PCM Inputs 5–6 are used for Loopback (recording audio from your
|
||
computer).
|
||
- All the Hardware Inputs and PCM Outputs are connected to the Mixer
|
||
Inputs.
|
||
- PCM Outputs 1–4 are connected to the Analogue Outputs 1–4 (via the
|
||
mixer).
|
||
- The Line 1–2 Outputs (Analogue Outputs 1–2) and the Headphones
|
||
(Analogue Outputs 5–6) share the Mixer Outputs A & B.
|
||
|
||
#### 4i4 Sample Direct Monitor Configuration
|
||
|
||
A common configuration for the 4i4 is to send the PCM 1 & 2 Outputs
|
||
mixed with the Analogue Inputs 1 & 2 to the Headphones, while leaving
|
||
the Analogue Outputs 1–2 as they are. This is an advanced version of
|
||
the direct monitoring feature that is available on the Solo and 2i2.
|
||
It can be implemented by:
|
||
|
||
1) Route Mixer Outputs E & F to Analogue Outputs 5 & 6.
|
||
2) Turn up Mix E & F DSP 1 & 2 levels in the mixer (see the mixer
|
||
example above for [2i2 Direct Monitor](#2i2-direct-monitor)).
|
||
|
||
As there are only 6 Mixer Outputs, the PCM 5 & 6 Inputs (Loopback) are
|
||
now shared with the headphones. If you want to retain the Loopback
|
||
functionality without having the Analogue Inputs mixed in, you could:
|
||
- Route the PCM 1 & 2 Outputs directly to the PCM 5 & 6 Inputs, rather
|
||
than going via the mixer, or
|
||
- Free up Mixer Outputs A & B for Loopback by routing PCM Outputs 1 &
|
||
2 directly to Analogue Outputs 1 & 2.
|
||
|
||
Besides Direct Monitor, there are many other possibilities for
|
||
routing/mixing with the 4i4. For example, by using the additional PCM
|
||
Outputs and Inputs you could set up a mix-minus configuration for a
|
||
podcast/video call.
|
||
|
||
## Levels
|
||
|
||
The meters show the levels seen by the interface at every routing
|
||
sink: Hardware Outputs, Mixer Inputs, DSP Inputs, and PCM Inputs. Open
|
||
this window by selecting the View → Levels menu option or pressing
|
||
Ctrl-L.
|
||
|
||
|
||
|
||
Look at this in conjunction with the routing window to understand
|
||
which meter corresponds to which source or sink.
|
||
|
||
Thanks for reading this far! If you appreciate the hundreds of hours
|
||
of work that went into the kernel driver, the control panel, and this
|
||
documentation, please consider supporting the author with a
|
||
[donation](../README.md#donations).
|